At this stage, the logo production technology has also been greatly improved with the development of the economy, but the design is relatively backward, we pay too much attention to the communication of information when designing, thus ignoring the design itself, let's talk about the design elements in the logo production that we cannot ignore.
The color design of the logo, in addition to special provisions in some logos, should generally be implemented in accordance with the visual design standard color, the whole should be coordinated and unified, and pay attention to the use of auxiliary colors. With different secondary colors representing different areas, it's easy to know where you're still in range. In addition, the color should not be too much, generally controlled at about 2~3 colors, otherwise, it will appear messy.
The selection of marking materials should consider factors such as durability, safety, convenience, and ease of maintenance of materials. General-purpose guide signs can generally be used in a modular structure, which is cost-saving and easy to replace. Different use environments can also choose to adapt to different regions of decorative materials and material standards, and can also develop and research to meet the requirements of new materials, so that the design is more regional and personalized, although the production cost is increased, its regional characteristics and image immediately showed.
The overall shape of the logo is the carrier that needs to convey information, most of the time we usually do not pay special attention to the shape of the logo production, resulting in the singleness of the logo expression, especially after the use of modular assembly and combination structure, modular combination requires the use of prefabricated specification profiles, combined into the size of the required "square matrix", to the square matrix represents a module, and then by a plurality of square matrix merged into a whole. It has the characteristics of setting according to functional needs, reflecting practicality, standardization, combination, easy replacement, adjustment, combination, assembly and disassembly, but has no personality or characteristics.
From the appearance, the outdoor auto dealer signs are placed outside, unlike the three-dimensional logo placed indoors, which can be seen clearly in a small area. The logo placed outdoors must meet people's needs in terms of area, and the logo should be clearer on it. Therefore, when making outdoor waterproof car logos, we must pay attention to the area, determine it in advance, measure it well, and then do it to avoid being unqualified due to the area after the production is completed.
The most important point of an outdoor waterproof car logo is to be waterproof, which is very important and the most difficult point. Waterproofing is related to many factors. One of the most important factors is the material used to make the outdoor logo. Different materials have different functions. The materials used must be waterproof, and the sealing must be good to avoid wet fog entering it and affecting the service life of the outdoor waterproof car logo.
Since the car dealership outdoor signs are given to the outside, the stability must be good, and the weather every day may not be. Maybe one day there will be a strong wind. If there is no fixed logo, the stability of the big logo is not good, and it is easy to damage when there is wind. The logo factory will add some additional support points when making so that the outdoor waterproof logo board can be better fixed and avoid damage to the logo board by wind and rain.